Checkout

0 Items / Total: £0

BASKET

Scott Proflow Respirator Kit Complete with Scott Promask

Scott Proflow Respirator Kit - Complete with Scott Promask and Storage Box

Available in sizes Small/Medium and Medium/Large

 

Proflow Respirator Kit


Description

Powered Air Respirator providing 160l/min flow rate - designed for Asbestos applications.

Proflow 2 SC 160 Asbestos incorporates a blower unit supplying filtered air to the facepiece through a breathing hose, a NiMH battery encased in a polyurethane casing.

A selection of facemasks (FM1) Half mask/FM2 (Sari)/FM3 (Promask)/ FM4 (Vision) and headtop incorporating helmet (FH6/Procap) are approved for use with Proflow Asbestos.

Proflow powered air respirators are compatible with approved Scott Safety Pro2000 filters. Please refer to specific filter approvals information further in this document.

The blower unit contains a DC motor powered radial fan running between 7,000 & 11,500 rpm, variable according to the filter/face piece combination requirements. A micro-controlled charger is available for the battery pack.

A microprocessor calculates the power required to maintain the set flow rate and automatically adjusts the flow rate. If the flow rate falls below the minimum 160 l/min, an audible warning sounds. An electronic limiter for motor rotation speed protects the motor from excessive wear during long-term use.

The supplied units are calibrated.

 

Battery

A NiMH rechargeable battery is safely enclosed within the casing. Batteries are 4/3 A size NiMH, 8 cell providing 9.6V/4.5Ah. The service life of the battery is extended by electronic control of recharging. The charging time is approximately 6 hours when fully discharged. Optimum performance of new batteries are obtained after three full charging and discharging cycles. The battery operating time is at least 4.5h, depending on the filter/headtop combination, satisfying the minimum 4h run time of the EN 12941/12942 Standards. The battery includes an internal overcurrent protection and temperature protection.

 

Charger

The microprocessor-controlled charger features an automatic recharging system including signal lights. The signal lamp on the charger indicates charging status. A fully-charged battery can be left connected to the charger without damage. The power pack can be left on standby charge and used whenever needed.

 

Data Logging and Service

Proflow2 SC 160 Asbestos incorporates a data-logging function which automatically records information about usage and performance of the blower unit. The Proflow 2.1 Service Tool Software is available to approved service centres for tracking the history of each individual power pack.

 

Blower Unit Display

An automatic monitoring feature checks that the unit is operating correctly, warns the user of low battery and quickly compensates for changes in airflow. A self-diagnostic test on start-up shows the current status of the respirator on the digital display.

  

Scott Promask

 

Description

 

The Scott Safety Promask Single is a multi-functional full face respirator suitable for use with negative pressure and powered air respirators. The respirator is also suitable for use with a compressed airline system.

 

The Promask full face single filter respirator is made from specially engineered halo-butyl elastomer

compound offering high resistance to chemicals and aging. The facepiece has a wide T-bar sealing edge, transparent inner mask with two inhalation valves and a 5-point adjustable rubber harness with quick release plastic buckles. The speech diaphragm helps transfer clear and audible speech along with a sweat port in the chin pocket providing added comfort during extended wear times. Wide panaromic polycarbonate visor to maximise the field of vision, with an optional polycarbonate hard coat visor to enhance resistance to scratching.

 

Accessories

 

A special welding visor frame for the Promask can be mounted on the respirator by two lever hooks. The flip-up lens can be fitted with welding glass of different shade or with an electro-optical “Autoshade” 10/11 lens (size: 60 x 100mm). The Promask can be provided with a sparkguard for the exhalation valve or speech channel. Custom-made, easy-to-attach spectacle frame is available for wearers of prescription lenses.

 

Approval Information

 

The Scott Safety Promask Single full face respirator is certified to AS/NZS 1716:2012.

 

Filters

 

The Scott Safety Pro2000 filters (40mm thread) for the Promask single filter full face respirator are also certified to AS/NZS 1716:2012.

 

 

£662.00 excl VAT

ADD TO BASKET FIND OUT MORE