Scott Phantom Vision Powered Respirator Kit

Item in Stock | Usually dispatched within 24 hours
Loading...

Phantom Vision Powered Respirator Full Kit - Complete with Storage Box

 Available in sizes Small/Medium and Medium/Large

 Fully tested and certificated before dispatch.

 

 Description

 Phantom Vision is a power assisted respirator with a high performance brushless motor and fan unit inside a full facemask. An external connection on the mask provides power to the motor via spring contacts and a cable to a rechargeable lithium-ion battery mounted on a waist belt. A single approved particle filter is fitted directly to the facepiece. 

Operation

The battery is enclosed in round case with ergonomically designed grip areas. The battery is attached to the power belt and rotated from ‘standby’ to ‘power on’ position to start the motor, drawing air through the filter and providing filtered air to the wearer. Starting with a fully charged battery, Phantom Vision provides 160 litres per minute for a minimum of eight hours.

 Air Management

The air management system directs air onto the inside of the visor to prevent misting. Air enters the breathing zone through the inhale valves of the inner half mask. Exhaled air is restricted to inside the half mask and exhausts to atmosphere through the exhale valve.

Decontamination & Cleaning

In its fully assembled configuration all external parts are resistant to water and dust ingress and the user can enter a decontamination shower wearing Phantom Vision. For further decontamination and cleaning all major parts can be easily disassembled and are wipe clean or immersible. Parts which must not be immersed are colour coded blue.

 Parts Disassembly and Assembly

The battery rotates to disconnect from the power belt. The filter and power cable unscrew from the mask. A spring clip detaches the motor unit and half mask from the facepiece. The half mask is easily removed from the motor unit. The system is straightforward to re-assemble by reversing the procedure.

Maintenance

Routine replacements are restricted to valves and seals on an annual basis, providing a low through life cost commitment. The design facilitates straightforward pre-use and regular inspection procedures and Phantom Vision can be re-certified for performance on a regular basis by approved and audited Scott Service Centres. All major component modules are replaceable when necessary.

 

Top