Thermac M Series Low Pressure Sprayer

The Thermac Low Pressure Sprayer has been designed to conform to the British Standard for equipment used in the controlled wetting of asbestos containing materials: BS 8520.1.2009.

Designed to suppress the release of airborne asbestos fibres by delivering a fine mist of surfactant mixed with water at a maximum pressure of 3 bar. The ratio of water to surfactant is typically 10%, this can be delivered through either 1 or 2 spray guns.

Features two spray guns, each with a hose length of 15 metres. Also supplied with 6 nozzles giving a variety of droplet and mist sizes, from 50 microns down to 5 microns.

It can also be used with our range of disinfectants for Decontamination and Deep Clean Sanitisation against Viruses and Bacteria. It can also be used with Idenden Fibre and Dust Suppressant. 

The unit is fitted with 100mm swivel castors for ease of movement. The 100 litre main tank, which includes a gauge marker inside, facilitates ease of mixing surfactant to the correct concentrations.

A switchable recirculation feature allows the tank contents to be recirculated through the pump and back into the tank when first filled, ensuring a homogeneous mix of water and surfactant prior to spraying.

Key features:

• Manufactured from ABS plastic
• Tank capacity 100 litre
• Gauge marker inside tank
• Provision for two spray guns
• Switchable recirculation feature
• Drain valve on tank
• Unique magnetic tank lid
• Low fluid level visual and audible warning

• M Series Low Pressure Sprayer/Fogger
• M Series Low Pressure Sprayer User Guide